Drone Carrier Software 2 (DCS2) v2.07a

DrBullwinkle · Post by **DrBullwinkle** » Mon, 3. Mar 14, 20:50

That is what I said, yes.

Tom5Cat · Post by **Tom5Cat** » Tue, 4. Mar 14, 19:21

DrBullwinkle wrote:That is what I said, yes.

It was a matter of interpretation

When in doubt, better safe than sorry!

I tried the patch... Tried to change the interceptor type to:
- custom M3 Heavy Raider.
- Vanilla M3 Eclipse.
- Vanilla M3 Chimera.
- Vanilla M4 Buster.
- Vanilla M5 Discoverer.

Everytime... same result... message in subtitle: "... is not a valid fighter, class is null"

Any ideas?

DrBullwinkle · Post by **DrBullwinkle** » Tue, 4. Mar 14, 19:29

Or, "When in doubt, just try it."

Oh, I got it. One of the commands that I use does not work in TC.

Give me a few minutes and I will make another test patch for you.

Tom5Cat · Post by **Tom5Cat** » Tue, 4. Mar 14, 19:46

DrBullwinkle wrote:Or, "When in doubt, just try it."

I'm not a scripter, so I have no idea what risks I'm taking introducing an unfitting script to my game. I'm over 100 hours in, so hesitent when unsure. Ah, the wisdom that creeps up on one over the years

Be waiting for the next patch then...

DrBullwinkle · Post by **DrBullwinkle** » Tue, 4. Mar 14, 21:02

It is just software. You can't break it.

(And you cannot break your saved game if you do not save it. I keep all of my saves so that I can always go back.)

Here, try this: Test patch for Tom5Cat

Tom5Cat · Post by **Tom5Cat** » Wed, 5. Mar 14, 00:00

DrBullwinkle wrote:It is just software. You can't break it.

Yeah, yeah... I will never sink, said Titanic

The new patch works like a charm! Thank you DrB!!
My custom M3 plays nice too! Replacing fighters was never this easy

Do I have full functionality now or did you leave out some stuff in the patch to just check the specific problem?

DrBullwinkle · Post by **DrBullwinkle** » Wed, 5. Mar 14, 00:03

Tom5Cat wrote:Replacing fighters was never this easy

Sweet. Just what I wanted to hear, Tom5Cat! Thanks for your patient testing and reporting.

Yes, you have full functionality. I will include the patch in the next version.

Tom5Cat · Post by **Tom5Cat** » Wed, 5. Mar 14, 00:23

DrBullwinkle wrote:Yes, you have full functionality. I will include the patch in the next version.

Gr8. Happy to oblige. Thx again for YOUR help and your gr8 script!!

gastovski · Post by **gastovski** » Fri, 7. Mar 14, 10:23

Still waiting for new version. I literally stopped playing because of this

.

DrBullwinkle · Post by **DrBullwinkle** » Fri, 7. Mar 14, 10:25

gastovski wrote:Still waiting for new version. I literally stopped playing because of this .

Because of what?

AFAIK, it does the job. It does have a couple of "rough edges" that need to be smoothed, but I am not aware of any "show-stoppers".

gastovski · Post by **gastovski** » Fri, 7. Mar 14, 10:30

I just want to rampage galaxy with M1s using DCS but some buggy stuff has been mentioned earlier posts prevents doing that. Thats why i stopped playing

.

DrBullwinkle · Post by **DrBullwinkle** » Fri, 7. Mar 14, 10:33

I don't see why you can't.

To rampage in an M1, turn off "Engage Enemies" and command the fighters yourself.

If you have only one carrier, then turn on wing support in the t file. That will make it easier to command your fighters, rather than having to use "Broadcast to all M3/4/5".

russbo · Post by **russbo** » Sun, 16. Mar 14, 05:40

Hi Dr B, been a while, real life, you know how it goes...

Been getting back into X3AP, got your latest software running on my CODEA carriers, have noticed something interesting.

Carriers will build the appropriate ships with the necessary CODEA required equipment.
You can easily hire and transfer CODEA pilots to these ships; they inhabit them, they fly in them according to CODEA's wishes. For a while that is...

For after a few minutes, the DRONE ships, which were assigned to a CODEA hangar (attack, interceptor, etc) will automatically become unassigned, and then just be listed as "scimitar" (which is what I requested the Drone software to make). The newly unassigned Scimitar still has a CODEA pilot in it; but it has lost it's hangar association. So, it doesn't do anything.

One thing I noticed, is that these DRONE ships do NOT have a home base assigned. The home base needs to be the CODEA carrier that they are based in, in their CODEA hangars. They seem to lose the hangar association because the DRONE ships do not a home base; they don't have the carrier has their home base. Other non drone ships will have a home base listed as the CODEA carrier that they live on.

Sorry to bring the CODEA stuff up again. Your script is working great, for a while. Something in CODEA must be looking at the ships home base and unassigning them if they don't belong to the CODEA carrier. I think...

Thanks for the great script. It's really going to be a game changer.

DrBullwinkle · Post by **DrBullwinkle** » Sun, 16. Mar 14, 06:29

Thanks for the report, Russbo! Just today I was wondering how it was going for the CODEA players. Nice to know that it is working out.

In the "Tips for CODEA Player" section in the first post, the first tip is: "Set Homebase to "yes" (ID 401)". (It was the last tip, but I moved it up because it is important).

That should fix your drones right up. I am glad you are enjoying the script.

russbo · Post by **russbo** » Sun, 16. Mar 14, 17:40

OOPS. Did not see that.... I'll try it, thanks!

Zaknafein · Post by **Zaknafein** » Sat, 29. Mar 14, 14:51

hi, today i tried your script and got a request-question:
could you add an option to just disable bomber building? i would like to have different carriers with different interceptors which works fine if i select the "optional interceptor" on every carrier seperatly but i cant choose between different bombers because i have to edit it in the t-file.
also its very uncomfortable to edit the t-file all the time if i want to "stop" bomber building or change their type.

2 extra menu options like, enable/disable bomberbuilding and an option to choose which kind of bomber (just like with the interceptors) would be a very nice enhancement to this script.

greetings

DrBullwinkle · Post by **DrBullwinkle** » Sat, 29. Mar 14, 14:57

Yes, I will add more flexibility for managing bomber types and numbers (per-carrier) in the next version. Thank you for your report.

Zaknafein · Post by **Zaknafein** » Sat, 29. Mar 14, 15:19

no, thank you for your effort

/edit and i disvoered something else that mby is very easy to change:
when i start the drone building command on the carrier the first drone gets build immediately and then the timer starts and they get build within this timer inbetween.
could you add an initialy timer-loop before the first drone gets build?
im asking because if someone wants to change the dronetype in the menu the first drone (or even more with a small timer) get build with the standard selection in the t-file before you can select a specific dronetype. if you dont want this drone you have to destroy it(them) and thats wasted money.

oh and it feels a lil bit more realistic if there is no instant popout

gastovski · Post by **gastovski** » Mon, 7. Apr 14, 10:54

Any ETA for next version?.

DrBullwinkle · Post by **DrBullwinkle** » Tue, 8. Apr 14, 04:05

@Zaknafein: Good idea about the timer. Added to the list.

@gastovski: I do not have a specific ETA, but I have been working in that direction (albeit slowly). It is next up on my "major projects" list (now that Marine Repairs and Training v213 is out).

egosoft.com

egosoft.com

Drone Carrier Software 2 (DCS2) v2.07a